Apollo Ultrasonic (Standard)

 

The Apollo Oil Gauge is the most reliable oil tank gauge on the market today. The Apollo uses a high quality FM signal to send out tank readings to a receiver placed in your home or office. The Apollo is easy to install and can be ready for use within minutes. This Apollo is a universal tank gauge, meaning that it can be fitted to any size or shape of tank up to 3 metres in height. The Apollo has independent transmitter and receiver; any transmitter can be re-coded with any receiver. 

The Apollo shows levels of fuel in your tank as a 10 bar display on the receiver. The transmission range is 200m and the transmitter contains a tried and test long life lithium battery. The Apollo transmitter is a totally sealed unit using UV stabilized material, therefore avoiding any problems associated with weathering. 

The Apollo transmitter fits into a 20mm/32mm diameter hole on the top of the tank, or by using the plastic adaptor (optional) fits a standard 38mm (1.5") gauge socket, or by using the Apollo Multi Adaptor (optional) fits a standard 32mm(1.25") 38mm(1.5"), and 50mm(2.0") gauge socket normally found in steel tanks. Suitable for use in tanks for the storage of diesel fuel, kerosene, and gas oil, Types A2, C1, C2, and D as defined by BS 2869. The Apollo meets EC and EMC regulations.

 

The Apollo Standard consists of a plug-in mains powered receiver and long-life battery powereed transmitter.

Specifications:

Display:
10 bar graph level display. Early warning Indication at a pre-determined height above tank bottom. Tank empty warning flashes red LED and audible warning at a pre-determined height from tank bottom.

Tank Depth measurement :
Minimum depth : 0,1 m, Maximum depth : 3 m

Max communication distance:
200m in normal ‘line of sight’ conditions

Power Supply :
Receiver: 150-250V, 50-60Hz, Meets EN60335
Transmitter: 3-volt lithium cell ( 3V-CR2430)

Battery life :
7-10 years (estimated life)

Wireless communications:
433 mHz.FM transmission, EN 300-220

Max and Min Operation Temp (Transmitter):
Operating temperature range -10° - +60°C.

 

 

User Reviews...

No User Reviews Yet