MR16 LED 12v Spotlights
New Range - Genuine CREE™ LED chipsets
We're pleased to have sourced this new range of MR16 LED spotlights which are built using the latest chipsets from CREE, the XR-E and the new MC-E. Both these chipsets are of the highest quality, producing staggering amounts of light from minimal wattages, with very useable colour temperatures and excellent colour rendition.

Built to last and save you money
Our MR16 LED spotlights are designed as direct replacements for existing 12v low voltage halogen lamps in a wide variety of fittings. They are fitted as standard with a high grade glass 70 degree beam lens (other beam angles available) for a crisp, sparkling beam of light. These lamps use a fraction of the electricity required by standard halogen MR16 lamps, yet give out just as much light. Use of CREE LEDs indicates an extremely long service life of up to 50,000 hours and so over its lifetime, one of these LED lamps replaces approximately 25 standard MR16 halogen spotlights, whilst saving as much as 2,450kWh of electricity - that's over £250 at 10.5p per kWh!
Our MR16 LED spotlights are available in a range of equivalent wattages from 20w to 50w+ with beam angles of 50deg, 70deg and 100deg to suit your individual needs.
Don't confuse our new lamps with first-generation 'novelty' LED offerings using multiple low output 'honeycombed' LEDs and producing very little light, often too blue and too dim for practical use, these new MR16 LED lamps are simply stunning and will not disappoint!
Warm or Cool?
Our MR16 LED lamps are available in two colour hues, Warm White and Cool White. The single exposure image on the right is of a display cabinet with toughened glass shelves containing glassware. The two sides of the cabinet are isolated from each other to prevent light interference. You can see that there is a significant difference between the Warm and Cool white lamps. Because of the way the colour temperature of LEDs is controlled, the cooler lamps are more intense than the warm ones. Although we describe the two lamp hues as 'warm' and 'cool', the light from a Warm White lamp is similar to a standard halogen lamp. The Cool White lamps are not actually cold, they produce a pure brilliant white light, equivalent to natural daylight without any hint of 'blueness' with which older technology LED lamps have been associated.
For a standard 'halogen style' lighting effect and for general home use we advise the fitting of Warm White lamps. For a cleaner 'pure white' more modern look, or for display lighting where accurate colour reproduction is important, we advise use of the Cool White lamps.
MR16 3W LED 12v Spot (Cool White)
No customer reviews
This MR16 12v LED spotlight is driven by a 3W CREE XR-E module and is equivalent to a standard 35w halogen MR16 lamp, yet uses only one tenth of the electricity to run and will outlast up to twenty five standard halogen MR16 spotlamps. This Cool White model is supplied fitted with a 70 degree clear beam lens for a focused, crisp beam of white light without any hint of blue for a modern hi-tech look.

- 12 volt
- 3w (35w Equiv.)
- 4500k Cool White
- 180 Lumens
- Not suitable for use with dimmer switches
In Stock Now for Same Day Dispatch!
MR16 3W LED 12v Spot (Warm White)
No customer reviews
This MR16 12v LED spotlight is driven by a 3W CREE XR-E module and is equivalent to a standard 35w halogen MR16 lamp, yet uses only one tenth of the electricity to run and will outlast up to twenty five standard halogen MR16 spotlamps. This Warm White model is supplied fitted with a 70 degree clear beam lens for a focused, crisp beam, similar to a tungsten halogen lamp.

- 12 volt
- 3w (35w Equiv.)
- 2800k Warm White
- 150 Lumens
- Not suitable for use with dimmer switches
In Stock Now for Same Day Dispatch!
MR16 4W LED 12v Spot (Cool White)
No customer reviews
This MR16 12v LED spotlight is driven by a 4W CREE MC-E module and is equivalent to a standard 50w halogen MR16 lamp, yet uses only one tenth of the electricity to run and will outlast up to twenty five standard halogen MR16 spotlamps. This Cool White model is supplied fitted with a 70 degree clear beam lens for a focused, crisp beam of white light without any hint of blue for a modern hi-tech look.

- 12 volt
- 4w (50w Equiv.)
- 4500k Cool White
- 430 Lumens
- Not suitable for use with dimmer switches
In Stock Now for Same Day Dispatch!
MR16 4W LED 12v Spot (Warm White)
No customer reviews
This MR16 12v LED spotlight is driven by a 4W CREE MC-E module and is equivalent to a standard 50w halogen MR16 lamp, yet uses only one tenth of the electricity to run and will outlast up to twenty five standard halogen MR16 spotlamps. This Warm White model is supplied fitted with a 70 degree clear beam lens for a focused, crisp beam, similar to a tungsten halogen lamp.

- 12 volt
- 4w (50w Equiv.)
- 2800k Warm White
- 320 Lumens
- Not suitable for use with dimmer switches
In Stock Now for Same Day Dispatch!
12V 100W Constant Voltage LED Driver Module
No customer reviews
MR16 12v LED spotlights draw only a fraction of the current of equivalent halogen lamps. This can cause problems with supply voltages of existing electronic transformers, where the output voltage may rise under low current draw. Our constant voltage 100 Watt LED driver module can power up to thirty 3w LED lamps or twenty five 4w lamps wired in parallel and will ensure maximum service life from your LED lighting investment. Should be fitted by a qualified electrician or competent person.
- Constant voltage LED driver
- Input 200-240VAC 1.2A
- Output 12VDC 8.5A
- Can drive up to 100 watts of LED lights
- Lamps should be wired in parallel
- Not dimmable
In Stock Now for Same Day Dispatch!
12V 35W Constant Voltage LED Driver Module
No customer reviews
MR16 12v LED spotlights draw only a fraction of the current of equivalent halogen lamps. This can cause problems with supply voltages of existing electronic transformers, where the output voltage may rise under low current draw. Our constant voltage 35 Watt LED driver module can power up to ten 3w LED lamps or eight 4w lamps wired in parallel and will ensure maximum service life from your LED lighting investment. Should be fitted by a qualified electrician or competent person.
- Constant voltage LED driver
- Input 200-240VAC 0.45A
- Output 12VDC 3.0A
- Can drive up to 35 watts of LED lights
- Lamps should be wired in parallel
- Not dimmable
In Stock Now for Same Day Dispatch!
Wireless Energy Monitors
Direct Replacement LED Lamps
- GU10 LED Spotlights
- MR16 LED 12v Spotlights
- Traditional 'Bulb' Shaped
- EarthLED LED Lamps
- LED 'Screw Fit' Spotlights
- Dimmable LED lamps
- Downlight Fittings
- Optional Beam Lenses

